2020 - 2021
Florida Department of Education
Curriculum Framework 

Program Title:	Dealer Line Technician
Career Cluster:	Transportation, Distribution and Logistics

CCC	
CIP Number	0647060418	
Program Type	College Credit	
Standard Length	53 credit hours	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	49-3023 – Automotive Service Technicians and Mechanics	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	

Purpose

This certificate program is part of the Manufacture-Specific Automotive Service Technology AAS degree program (0647060407).  

A College Credit Certificate consists of a program of instruction of less than sixty (60) credits of college-level courses, which is part of an AS or AAS degree program and prepares students for entry into employment (Rule 6A-14.030, F.A.C.).

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Transportation, Distribution and Logistics  career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Transportation, Distribution and Logistics career cluster. 

The content includes but is not limited to instruction in diagnosis of malfunctions in the repair of electrical, brake systems, steering and suspension systems; troubleshooting skills; and servicing, maintaining and repairing all mechanical systems on gasoline automobiles including electrical, brake, suspension and related systems. The course content should also include training in communication, leadership, human relations and employability skills; and safe, efficient work practices.  This program focuses on broad, transferable skills and stresses understanding and demonstration of the following elements of the Automotive Service industry; technical and product skills, underlying principles of technology, and health, safety, and environmental issues.

The content includes but is not limited to a written business plan that establishes a partnership agreement between the educational institution and the automotive industry.

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Demonstrate proficiency in the equipment skills and safety regulations relating to the automotive industry.
02.0	Demonstrate proficiency in appropriate math skills.
03.0	Demonstrate proficiency in appropriate understanding of basic sciences.  
04.0	Demonstrate proficiency in employability skills.
05.0	Demonstrate proficiency in appropriate communication skills.
06.0	Demonstrate proficiency in acceptable employee behavior in the automotive industry.  
07.0	Demonstrate proficiency in engine theory and repairs.
08.0	Demonstrate proficiency in the operation and servicing of automatic transmission/trans-axle.
09.0	Demonstrate proficiency in the operation and servicing of manual drive trains and axles.
10.0	Demonstrate proficiency in the operation of steering and suspension systems.
11.0	Demonstrate proficiency in the operation and servicing of automotive brake systems.
12.0	Demonstrate proficiency in diagnosing/troubleshooting electrical/electronic components as related to power train.
13.0	Demonstrate proficiency in heating, air conditioning and engine cooling systems.
14.0	Demonstrate proficiency in engine performance service.

2020 - 2021
Florida Department of Education
Student Performance Standards

Program Title:	Dealer Line Technician
CIP Numbers:	0647060418
Program Length:	53 credit hours
SOC Code(s):	49-3023

This certificate program is part of the Dealer-Specific Automotive Technology / New Name 2017-2018, Manufacture-Specific Automotive Service Technology AAS degree program (0647060407).  At the completion of this program, the student will be able to:	
01.0	Demonstrate proficiency in the equipment skills and safety regulations relating to the automotive industry.--The student will be able to:	
01.01	Apply shop safety rules, EPA and OSHA standards.	
01.02	Comply with the required use of safety glasses, ear protection, gloves, and shoes during lab/shop activities.	
01.03	Identify and initiate appropriate emergency response procedures.	
01.04	Identify, use and maintain hand and power tools properly.	
01.05	Identify and use proper placement of floor jacks and jack stands.	
01.06	Identify and practice using appropriate precision measuring tools and torque methods.	
01.07	Identify and describe the proper procedure to apply and remove automotive fasteners, to include thread repair.	
01.08	Identify and use metric and English measurement skills.	
01.09	Use computer and operate keyboard.	
01.10	Identify automobiles according to engine location, cylinders, type of drive system, purpose, etc.	
01.11	Identify and describe typical automotive lubricants and lubricant properties.	
01.12	Interpret the Federal Law as recorded in (29 CFR-1910.1200).	
01.13	Identify and describe typical automotive seals and gaskets.	
01.14	Utilize flat rate manuals, service manuals, service bulletins, parts manuals and electronic service information.	
01.15	Complete work order to include customer information, vehicle identifying information, customer concern, related service history, cause, and correction.	
01.16	Demonstrate knowledge of applicable certifications.	
01.17	Describe and identify supplemental restraint systems (SRS).	
01.18	Disable supplemental restraint systems (SRS) in accordance with manufacturers' procedures.	
02.0	Demonstrate proficiency in appropriate math skills.--The student will be able to:	
02.01	Read and interpret measuring devices.	
02.02	Solve number word problems.	
02.03	Solve percentage problems.	
02.04	Operate a calculator.	
02.05	Use metric units related to auto industry.	
02.06	Convert inches to millimeters and millimeters to inches.	
02.07	Solve problems of length, area, volume and weight to include the circumference of a circle, the area of a rectangle, and the volume of a cylinder.	
02.08	Measure size within a specified tolerance.	
02.09	Add, subtract, multiply and divide using fractions, decimals, and whole numbers.	
02.10	Identify various types of gears and interpret the meaning of a gear ratio number.	
03.0	Demonstrate proficiency in appropriate  understanding of basic sciences.--The student will be able to:	
03.01	Understand molecular action as a result of temperature extremes, chemical reaction, and moisture content.	
03.02	Draw conclusions or make inferences from data.	
03.03	Identify health related problems which may result from exposure to work related chemicals and hazardous materials, and know the proper precautions required for handling such materials.	
03.04	Understand pressure measurement in terms of P.S.I., inches of mercury, and K.P.A.	
04.0	Demonstrate proficiency in employability skills.--The student will be able to:	
04.01	Identify employment requirements for an automotive career.	
04.02	Identify documents, which may be required when applying for a job.	
04.03	Complete a job application form correctly.	
04.04	Identify and adopt acceptable work habits.	
04.05	Identify acceptable employee health habits; including infection control of blood borne pathogens.	
04.06	Demonstrate appropriate telephone/communication skills.	
04.07	Conduct a job search.	
04.08	Demonstrate competence in job interview techniques.	
04.09	Identify or demonstrate appropriate responses to criticism from employer, supervisor or other employees.	
04.10	Demonstrate knowledge of how to make job changes appropriately.	
04.11	Describe the Federal Law as recorded in (29 CFR-1910.1200).	
05.0	Demonstrate proficiency in appropriate communication skills.--The student will be able to:	
05.01	Write logical and understandable statements, or phrases, to accurately fill out forms/invoices commonly used in business and industry.	
05.02	Read and understand graphs, charts, diagrams, and tables commonly used in this industry/occupation area.	
05.03	Read and follow written and oral instructions.	
05.04	Answer and ask questions coherently and concisely.	
06.0	Demonstrate proficiency in acceptable employee behavior in the automotive industry.--The student will be able to:	
06.01	Explain the effects of chemical/substance abuse.	
06.02	Identify principles of stress management.	
06.03	Identify and define career opportunities in the automotive service industry.	
06.04	Demonstrate acceptable industry dress code.	
06.05	Identify and demonstrate proper customer relations skills.	
06.06	Identify principles of time management.	
06.07	Identify acceptable customer relations.	
07.0	Demonstrate proficiency in engine theory and repair.--The student will be able to:	
07.01	Interpret and verify complaint; determine necessary action.	
07.02	Inspect engine assembly for fuel, oil, coolant, and other leaks; determine necessary action.	
07.03	Listen to engine noises; determine necessary action.	
07.04	Diagnose the cause of excessive oil consumption, unusual engine exhaust color, odor, and sound; determine necessary action.	
07.05	Perform engine vacuum tests; determine necessary action.	
07.06	Perform cylinder power balance tests; determine necessary action.	
07.07	Perform cylinder compression tests; determine necessary action.	
07.08	Perform cylinder leakage tests; determine necessary action.	
07.09	Remove and re-install engine.	
07.10	Identify hybrid vehicle internal combustion engine service precautions.	
Cylinder Head and Valve Train Diagnosis and Repair	
07.11	Remove cylinder head(s); inspect cylinder head(s) for cracks; check gasket surface areas for warpage and leakage; check passage condition.	
07.12	Install cylinder heads and gaskets; tighten according to manufacturer’s specifications and procedures.	
07.13	Inspect and test valve springs for square-ness, pressure, and free height comparison; replace as needed.	
07.14	Inspect valve spring retainers, locks, and valve grooves.	
07.15	Replace valve stem seals.	
07.16	Inspect valve guides for wear; check valve guide height and stem- to-guide clearance; determine necessary action.	
07.17	Inspect valves; determine necessary action.	
07.18	Inspect valve seats; determine necessary action.	
07.19	Check valve face-to-seat contact and valve seat concentricity (run out); determine necessary action.	
07.20	Check valve spring assembled height and valve stem height; service valve and spring assemblies as needed.	
07.21	Inspect pushrods, rocker arms, rocker arm pivots and shafts for wear, bending, cracks, looseness, and blocked oil passages (orifices); repair or replace.	
07.22	Inspect hydraulic or mechanical lifters; replace as needed.	
07.23	Adjust valves (mechanical or hydraulic lifters).	
07.24	Inspect and replace camshaft drives (including gear wear and backlash, sprocket and chain wear, overhead cam drive sprockets, drive belts, belt tension, and tensioners).	
07.25	Inspect camshaft for run out; measure journals and lobes for wear.	
07.26	Inspect and measure camshaft bearings for wear, damage, out of round, and alignment; determine necessary action.	
07.27	Verify camshaft(s) timing according to manufacturer’s specifications and procedure.	
07.28	Service product specific cam drive systems.	
07.29	Perform product specific valve adjustments.	
07.30	Remove and replace valve cover gaskets.	
Engine Block Diagnosis and Repair	
07.31	Inspect and replace pans, covers, gaskets, and seals.	
07.32	Inspect engine block for cracks, passage condition, core and gallery plug condition, and surface warpage; determine needed repairs.	
07.33	Inspect internal and external threads; repair as needed.	
07.34	Remove cylinder wall ridges.	
07.35	Inspect and measure cylinder walls for damage and wear; determine necessary action.	
07.36	Deglaze and clean cylinder walls.	
07.37	Inspect and measure camshaft bearings for wear, damage, out-of-round, and alignment; determine necessary action.	
07.38	Inspect crankshaft for surface cracks and journal damage; check oil passage condition; measure journal wear; determine necessary action.	
07.39	Inspect and measure main and connecting rod bearings for damage, clearance, and end play; determine necessary action (includes the proper selections of bearings).	
07.40	Identify position and bearing wear patterns that include connecting rod alignment and main bearing bore problems; inspect rod alignment and bearing bore condition.	
07.41	Inspect, measure, service or replace pistons.	
07.42	Inspect, measure, and install piston rings.	
07.43	Inspect, repair or replace crankshaft vibration damper (harmonic balancer).	
07.44	Inspect flywheel or flex-plate and ring gear for cracks and wear; measure run out; determine necessary action.	
07.45	Inspect, remove, and replace crankshaft pilot bearing or bushing (as applicable).	
07.46	Reassemble engine components using correct gaskets and sealants.	
07.47	Inspect auxiliary (balance, intermediate, idler, counterbalance or silencer) shaft(s); inspect shaft(s) and support bearings for damage and wear; determine necessary action; reinstall and time.	
Lubrication and Cooling Systems Diagnosis and Repairs	
07.48	Prime engine lubrication system.	
07.49	Perform oil pressure tests; determine necessary action.	
07.50	Inspect oil pump gears or rotors, housing, pressure relief devices, and pump drive; replace as needed.	
07.51	Perform cooling system tests (pressure, combustion leakage, and temperature); determine necessary action.	
07.52	Inspect, replace, and adjust drive belts and pulleys.	
07.53	Inspect and replace engine cooling and heater system hoses.	
07.54	Inspect, test, and replace thermostat and housing.	
07.55	Inspect coolant; drain, flush, and refill cooling system with recommended coolant and bleed air as required.	
07.56	Inspect, test, remove, and replace water pump.	
07.57	Inspect and test radiator, pressure cap, and coolant recovery system; remove and replace radiator.	
07.58	Clean, inspect, and test fan(s) (electrical or mechanical), fan clutch, fan shroud, and air dams.	
07.59	Inspect and test electrical fan control system and circuits.	
07.60	Inspect auxiliary oil coolers; replace as needed.	
07.61	Inspect, test, and replace oil temperature and pressure switches and sensors.	
07.62	Perform oil and filter change.	
08.0	Demonstrate proficiency in the operation and servicing of automatic transmission/transaxle.--The student will be able to:	
08.01	Interpret and verify driver’s complaint; verify proper engine operation; determine necessary action.	
08.02	Diagnose unusual fluid usage, level, and condition problems; determine necessary action.	
08.03	Perform pressure tests; determine necessary action.	
08.04	Perform stall tests; determine necessary action.	
08.05	Perform lock-up converter system tests; determine necessary action.	
08.06	Diagnose electronic, mechanical, and vacuum control systems; determine necessary action.	
08.07	Diagnose noise and vibration problems; determine necessary action.	
Transmission and Transaxle Maintenance and Adjustment	
08.08	Inspect, adjust or replace manual shift valve and throttle (TV) linkages or cables and check gear select indicator (as applicable).	
08.09	Service transmission; perform visual inspection; replace fluids and filters.	
In-Vehicle Transmission and Transaxle Repair	
08.10	Inspect and replace external seals and gaskets.	
08.11	Inspect extension housing; replace bushing and seals.	
08.12	Inspect, leak test, flush, and replace cooler, lines, and fittings.	
08.13	Inspect, measure, clean, and replace valve body (includes surfaces and bores, springs, valves, sleeves, retainers, brackets, check-balls, screens, spacers, and gaskets); check/adjust valve body bolt torque.	
08.14	Inspect servo bore, piston, seals, pin, spring, and retainers; repair or replace as needed.	
08.15	Inspect accumulator bore, piston, seals, spring, and retainer; repair or replace as needed.	
08.16	Inspect, test, adjust, repair or replace transmission related electrical and electronic components (includes computers, solenoids, sensors, relays, switches, and harnesses).	
08.17	Inspect, replace, and align power train mounts.	
Off-Vehicle Transmission and Transaxle Repair (Removal, Disassembly, and Reinstallation)	
08.18	Remove and reinstall transmission/transaxle and torque converter.	
08.19	Disassemble, clean, and inspect transmission/transaxle.	
08.20	Assemble transmission/transaxle.	
Oil Pump and Converter	
08.21	Inspect converter flex plate, attaching parts, pilot drive, pump drive, and seal areas.	
08.22	Measure torque converter end play and check for interference check stator clutch.	
08.23	Inspect, measure, and replace oil pump housings, shafts, vanes, rotors, gears, valves, seals, and bushings.	
08.24	Check torque converter and transmission cooling system for contamination.	
Gear Train, Shafts, Bushings and Case	
08.25	Check end play or preload; determine needed service.	
08.26	Inspect, measure, and replace thrust washers and bearings.	
08.27	Inspect oil delivery seal rings, ring grooves, and sealing surface areas.	
08.28	Inspect bushings; replace as needed.	
08.29	Inspect and measure planetary gear assembly (includes sun, ring gear, thrust washers, planetary gears, and carrier assembly); replace as needed.	
08.30	Inspect cases, bores, passages, bushings, vents, and mating surfaces; replace as needed.	
08.31	Inspect transaxle drive, link chains, sprockets, gears, bearings and bushings; replace as needed.	
08.32	Inspect, measure, repair, adjust or replace transaxle final drive components.	
08.33	Inspect and reinstall parking pawl, shaft, spring, and retainer; replace as needed.	
Friction and Reaction Units	
08.34	Inspect clutch drum, piston, check-balls, springs, retainers, seals, and friction and pressure plates; replace as needed.	
08.35	Measure clutch pack clearance; adjust as needed.	
08.36	Air test operation of clutch and servo assemblies.	
08.37	Inspect roller and sprag clutch, races, rollers, sprags, springs, cages, and retainers; replace as needed.	
08.38	Inspect bands and drums; replace as needed.	
09.0	Demonstrate proficiency in the operation and assembly of manual drive transmission/transaxle.--The student will be able to:	
09.01	Diagnose clutch noise, binding, slippage, pulsation, and chatter problems; determine necessary action.	
09.02	Inspect, adjust or replace clutch pedal linkage, automatic adjuster mechanisms, brackets, bushings, pivots, and springs.	
09.03	Inspect, adjust, repair or replace hydraulic clutch slave master-cylinders, lines, and hoses.	
09.04	Inspect, adjust or replace release (throw-out) bearing, lever, and pivot.	
09.05	Inspect and replace clutch pressure plate assembly and clutch disc. 	
09.06	Inspect, remove or replace crankshaft pilot bearing or bushing (as applicable).	
09.07	Inspect, repair, and service or replace flywheel and ring gear.	
09.08	Inspect engine block, clutch (bell) housing, and transmission case mating surface; determine necessary action.	
09.09	Measure flywheel-to-block run out and crankshaft end play; determine necessary action.	
09.10	Measure clutch (bell) housing bore-to-crankshaft run out and face square-ness; determine needed service.	
09.11	Inspect accumulator bore, piston, seals, spring, and retainer; repair or replace as needed.	
Transmission Diagnosis and Repair	
09.12	Diagnose transmission noise, hard shifting, jumping out of gear, and fluid leakage problems; determine necessary action.	
09.13	Inspect, adjust, and replace transmission shift linkages, brackets, bearings, cables, pivots, and levers.	
09.14	Inspect, replace, and align power train mounts.	
09.15	Inspect and replace transmission gaskets, seals, and sealants; Inspect sealing surfaces.	
09.16	Remove and reinstall transmission.	
09.17	Disassemble, clean, and reassemble transmission components.	
09.18	Inspect, adjust, and reinstall transmission shift cover, forks, grommets, levers, shafts, sleeves, detent mechanisms, interlocks, and springs.	
09.19	Inspect and reinstall input (clutch) shaft and bearings.	
09.20	Inspect and reinstall main shaft, gears, thrust washers, bearings, and retainers.	
09.21	Inspect and reinstall synchronizer hub, sleeve, keys (inserts), springs, and blocking rings.	
09.22	Inspect and reinstall counter (cluster) gear, shaft, bearings, thrust washers, and retainers; check end play; adjust as needed.	
09.23	Inspect and reinstall reverse idler gear, shaft, bearings, thrust washers, and retainers; check end play; adjust as needed.	
09.24	Inspect, repair, and replace extension housing and transmission case mating surfaces, bores, bushings, and vents.	
09.25	Inspect lubrication devices (oil pump or slingers).	
Transaxle Diagnosis and Repair	
09.26	Diagnose transaxle noise, hard shifting, jumping out of gear, and fluid leakage problem; determine necessary action.	
09.27	Inspect, adjust, and reinstall transaxle shift linkages, brackets, bushings, cables, pivots, and levers.	
09.28	Inspect and reinstall power train mounts.	
09.29	Remove and reinstall transaxle.	
09.30	Inspect and replace transaxle gaskets, seals, and sealants; inspect sealing surfaces.	
09.31	Remove and replace transaxle final drive.	
09.32	Disassemble and clean transaxle final drive.	
09.33	Inspect, adjust, and reinstall transaxle shift cover, forks, levers, grommets, shafts, sleeves, detent mechanism, interlocks, and springs.	
09.34	Inspect and reinstall input (clutch) shaft and bearings.	
09.35	Inspect and reinstall output shaft, gears, thrust washers, bearings, and retainers.	
09.36	Measure end play or preload (shim or spacer selection procedure) on transaxle shafts; adjust as needed.	
09.37	Inspect and reinstall synchronizer hub, sleeve, keys (inserts), springs, and blocking rings.	
09.38	Inspect and reinstall reverse idler gear, shaft, bearings, thrust washers, and retainers.	
09.39	Inspect transaxle case, mating surfaces, bores, bushings, and vents.	
09.40	Diagnose differential assembly noise and vibration problems; determine necessary action.	
09.41	Remove, inspect, measure, adjust, and reinstall differential pinion gears (spiders), shaft, side gears, side bearings, thrust washers, and case assembly.	
09.42	Inspect lubrication devices (oil pump or slingers).	
Drive and Half Shaft Universal and Constant-Velocity (CV) Joint Diagnosis and Repair	
09.43	Diagnose constant-velocity (CV) joint noise and vibration problems; determine necessary action.	
09.44	Diagnose universal joint noise and vibration problems; determine necessary action.	
09.45	Diagnose front wheel drive (FWD) front wheel bearing noise and vibration problems; determine necessary action.	
09.46	Inspect, service, and replace shafts, yokes, boots, and universal/CV joints.	
09.47	Inspect, service, and replace shaft center support bearings.	
09.48	Check and correct shaft balance; measure shaft run out; measure and adjust driveline angles.	
Rear Axle Diagnosis and Repair; Ring and Pinion Gears and Differential Case Assembly	
09.49	Diagnose noise and vibration problems; determine necessary action.	
09.50	Diagnose fluid leakage problems; determine necessary action.	
09.51	Inspect and replace companion flange and pinion seal; measure companion flange run out.	
09.52	Inspect ring gear and measure run out; determine necessary action.	
09.53	Remove and inspect drive pinion gear, spacers, sleeves, and bearings.	
09.54	Measure and adjust drive pinion depth.	
09.55	Measure and adjust drive pinion bearing preload.	
09.56	Measure and adjust side bearing preload and ring and pinion gear total backlash and backlash variation on a differential carrier assembly (threaded cup and shim types).	
09.57	Check ring and pinion tooth contact patterns; adjust as needed.	
09.58	Disassemble, inspect, measure, and adjust or replace differential pinion gears (spiders), shaft, side gears, side bearings, thrust washers, and case.	
09.59	Reassemble and reinstall differential case assembly; measure run out; determine necessary action.	
Limited Slip Differential	
09.60	Diagnose noise, slippage, and chatter problems; determine necessary action.	
09.61	Inspect and flush differential housing; refill with correct lubricant.	
09.62	Inspect and reinstall clutch (cone or plate) components.	
09.63	Measure rotating torque; determine necessary action.	
09.64	Verify matching tires & tolerances.	
Axle Shaft	
09.65	Diagnose rear axle shafts, bearings, and seals for noise, vibration, and fluid leakage problems; determine necessary action.	
09.66	Inspect and replace rear axle shaft wheel studs.	
09.67	Remove and replace rear axle shafts.	
09.68	Inspect and replace rear axle shaft seals, bearings, and retainers.	
09.69	Measure rear axle flange run out and shaft end play; determine necessary action.	
Four-Wheel Drive/All-Wheel Drive Component Diagnosis and Repair	
09.70	Diagnose noise, vibration, and unusual steering problems; determine necessary action.	
09.71	Inspect, adjust, and repair shifting controls (mechanical, electrical, and vacuum), bushings, mounts, levers, and brackets.	
09.72	Remove and reinstall transfer case.	
09.73	Disassemble, service, and reassemble transfer case and components.	
09.74	Inspect, service, and replace front-wheel bearings and locking hubs.	
09.75	Check drive assembly seals and vents; check lube level.	
09.76	Inspect viscous coupling assembly.	
09.77	Verify matching tires & tolerances.	
10.0	Demonstrate proficiency in the operation of steering and suspension systems.--The student will be able to:	
10.01	Disable supplemental restraint system (SRS) in accordance with manufacturer’s procedures.	
10.02	Diagnose steering column noises, looseness, and binding problems (including tilt mechanisms); determine necessary action.	
10.03	Diagnose power non-rack and pinion steering gear binding, uneven turning effort, looseness, hard steering, and fluid leakage problems; determine necessary action.	
10.04	Diagnose power rack and pinion steering gear vibration, looseness, and hard steering problems; determine necessary action.	
10.05	Inspect and replace steering shaft universal-joint(s), flexible coupling(s), collapsible column, lock cylinder mechanism, and steering wheel.	
10.06	Remove and replace manual or power rack and pinion steering gear; inspect mounting bushings and brackets.	
10.07	Inspect and replace manual or power rack and pinion steering gear inner tie rod ends (sockets) and bellows boots.	
10.08	Inspect manual and power steering fluid levels and condition.	
10.09	Flush, fill, and bleed power steering system.	
10.10	Diagnose power steering fluid leakage; determine necessary action.	
10.11	Inspect, replace, and adjust power steering pump belt.	
10.12	Remove, inspect, and replace power steering pump, pump mounts, pump seals, and gaskets.	
10.13	Remove, inspect, and replace power steering pump pulley; check alignment.	
10.14	Perform power steering system pressure test; determine needed repairs.	
10.15	Inspect and replace power steering hoses and fittings.	
10.16	Inspect and replace pitman arm, relay (center-link/intermediate) rod, idler arm and mountings, and steering linkage damper.	
10.17	Inspect, replace, and adjust tie rod ends (sockets), tie rod sleeves, and clamps.	
10.18	Diagnose, inspect, adjust, repair or replace components of electronically-controlled steering systems.	
10.19	Diagnose, inspect, repair or replace components of variable-assist steering systems.	
10.20	Inspect electrical power assisted steering.	
Suspension Systems Diagnosis and Repair; Front Suspensions	
10.21	Diagnose short and long arm suspension system noises, body sway, and uneven riding height problems; determine necessary action.	
10.22	Diagnose MacPherson strut suspension system noises body sway, and uneven riding height problems; determine necessary action.	
10.23	Remove, inspect, and replace upper and lower control arms, bushings, shafts, and rebound bumpers.	
10.24	Remove, inspect, replace, and adjust strut (compression/tension) rods and bushings.	
10.25	Remove, inspect, and replace upper and lower ball joints on short and long arm suspension systems.	
10.26	Remove, inspect, and replace steering knuckle assemblies.	
10.27	Remove, inspect, and replace short and long arm suspension system coil springs and spring insulators.	
10.28	Remove, inspect, replace, and adjust suspension system torsion bars; inspect mounts.	
10.29	Remove, inspect and replace stabilizer bar bushings, brackets, and links.	
10.30	Remove, inspect, and replace ball joints on MacPherson strut suspension systems.	
10.31	Remove, inspect, and replace MacPherson strut assembly, strut coil spring, insulators, and upper strut bearing mount.	
10.32	Lubricate suspension and steering systems.	
Rear Suspensions	
10.33	Remove, inspect, and replace coil springs and spring insulators.	
10.34	Remove, inspect, and replace transverse links, control arms, bushings, and mounts.	
10.35	Remove, inspect, and replace leaf springs, leaf spring insulators (silencers), shackles, brackets, bushings, and mounts.	
10.36	Remove, inspect, and replace MacPherson strut assembly, strut coil spring, and insulators (silencers).	
Miscellaneous Service	
10.37	Inspect, remove, and replace shock absorbers.	
10.38	Remove, inspect, and service or replace front and rear wheel bearings.	
10.39	Diagnose, inspect, adjust, repair or replace components of electronically-controlled suspension systems.	
Wheel Alignment Diagnosis, Adjustment, and Repair	
10.40	Diagnose vehicle wander, drift, pull, hard steering, bump steer, memory steer, torque steer, and steering return problems; determine necessary action.	
10.41	Measure vehicle riding height; determine necessary action.	
10.42	Check and adjust front and rear wheel camber; determine needed repairs.	
10.43	Check and adjust caster; determine necessary action.	
10.44	Check and adjust front wheel toe; adjust as needed.	
10.45	Center steering wheel.	
10.46	Check toe-out-on-turns (turning radius); determine needed repairs.	
10.47	Check SAI (steering axis inclination) and included angle; determine necessary action.	
10.48	Check and adjust rear wheel toe.	
10.49	Check rear wheel thrust angle; determine necessary action.	
10.50	Check for front wheel setback; determine necessary action.	
10.51	Check front cradle (sub-frame) alignment; determine needed repairs.	
10.52	Reset steering angle sensor.	
Wheel and Tire Diagnosis and Repair	
10.53	Inspect tires, diagnose tire wear patterns; check and adjust air pressure.	
10.54	Diagnose wheel/tire vibration, shimmy, and noise problems; determine necessary action.	
10.55	Rotate tires according to manufacturer’s recommendations.	
10.56	Measure wheel, tire, axle, and hub run out; determine needed repairs.	
10.57	Diagnose tire pull (lead) problem; determine corrective actions.	
10.58	Balance wheel and tire assembly (static and dynamic).	
10.59	Dismount, inspect, repair, and remount tire on wheel.	
10.60	Reinstall wheel; torque lug nuts.	
10.61	Identify and test pressure monitoring system (indirect and direct) for operation; calibrate system, verify operation of instrument panel lamps.	
10.62	Demonstrate knowledge of steps required to remove and replace sensors in a tire pressure monitoring system.	
11.0	Demonstrate proficiency in the operation and servicing of automotive brake system.--The student will be able to:	
11.01	Measure brake pedal height, travel, and free play; determine necessary action.	
11.02	Check master cylinder for internal and external leaks and proper operation; determine necessary action.	
11.03	Remove, bench bleed, and replace master cylinder.	
11.04	Diagnose poor stopping, pulling or dragging caused by problems in the hydraulic system; determine necessary action.	
11.05	Inspect brake lines and fittings for leaks, dents, kinks, rust, cracks or wear; tighten loose fittings and supports.	
11.06	Inspect flexible brake hoses for leaks, kinks, cracks, bulging or wear; tighten loose fittings and supports.	
11.07	Fabricate and install brake lines (double flare and ISO types); replace hoses, fittings, and supports as needed.	
11.08	Select, handle, store, and install brake fluids to proper level.	
11.09	Inspect, test, and replace metering (hold-off), proportioning (balance), pressure differential, and combination valves.	
11.10	Inspect, test, replace, and adjust height (load) sensing proportioning valve.	
11.11	Inspect, test, and replace components of brake warning light system.	
11.12	Bleed (manual, pressure, vacuum or surge) brake system; flush hydraulic system.	
Drum Brake Diagnosis and Repair	
11.13	Diagnose poor stopping, noise, pulling, grabbing, dragging or pedal pulsation problems; determine necessary action.	
11.14	Remove, clean (using proper safety procedures), inspect, and measure brake drums; service or replace as needed.	
11.15	Mount brake drum on lathe machine braking surface.	
11.16	Remove, clean, and inspect brake shoes, springs, pins, clips, levers, adjusters/self-adjusters, other related brake hardware, and backing support plates; lubricate and reassemble.	
11.17	Remove and reinstall wheel cylinders.	
11.18	Pre-adjust brake shoes and parking brake before installing brake drums or drum/hub assemblies and wheel bearings.	
11.19	Reinstall wheel, torque lug nuts, and make final checks and adjustments.	
Disc Brake Diagnosis and Repair	
11.20	Diagnose poor stopping, noise, pulling, grabbing, dragging or pedal pulsation caused problems; determine necessary action.	
11.21	Remove caliper assembly from mountings; clean and inspect for leaks and damage to caliper housing.	
11.22	Clean and inspect caliper mounting and slides for wear and damage.	
11.23	Remove, clean, and inspect pads and retaining hardware; determine needed service.	
11.24	Reassemble, lubricate, and reinstall caliper, pads, and related hardware.	
11.25	Clean, inspect, and measure rotor with a dial indicator and a micrometer; follow manufacturer’s recommendations in determining need to machine or replace.	
11.26	Refinish rotor according to manufacturer’s recommendations.	
11.27	Adjust calipers with integrated parking brake system.	
11.28	Fill master cylinder with recommended fluid and seat pads; inspect caliper for leaks.	
11.29	Reinstall wheel, torque lug nuts, and make final checks and adjustments.	
11.30	Remove and replace rotor.	
Power Assist Units Diagnosis and Repair	
11.31	Test pedal free travel with and without engine running; check power assist operation.	
11.32	Check vacuum supply (manifold or auxiliary pump) to vacuum-type power booster.	
11.33	Inspect hydro and/or vacuum-type power booster unit for proper operation; repair or replace parts as needed.	
Miscellaneous (Wheel Bearings, Parking Brakes, Electrical, Etc.) Diagnosis and Repair	
11.34	Diagnose wheel bearing noises, wheel shimmy, and vibration problems; determine necessary action.	
11.35	Remove, clean, inspect, repack, and reinstall wheel bearings and replace seals; reinstall hub and adjust wheel bearings.	
11.36	Check parking brake cables and components for wear, rusting, binding, and corrosion; clean, lubricate, and replace as needed.	
11.37	Check parking brake operation; adjust as needed.	
11.38	Check operation of parking brake indicator light system.	
11.39	Check operation of brake stop light system; adjust and service as needed.	
11.40	Replace wheel bearing and race.	
Electronic Brake, Traction, and Stability Control Systems Diagnosis and Repair	
11.41	Inspect, test, and service anti-lock brake system (ABS) hydraulic, electrical, and mechanical components.	
11.42	Diagnose poor stopping, wheel lock-up, abnormal pedal feel or pulsation, and noise problems caused by the anti-lock brake system (ABS); determine necessary action.	
11.43	Observe anti-lock brake system (ABS) warning light(s) at startup; determine if further diagnosis is needed.	
11.44	Diagnose anti-lock brake system (ABS) electronic control(s) and components using self-diagnosis and/or recommended test equipment; determine necessary action.	
11.45	Depressurize high pressure components of the anti-lock brake system (ABS) following manufacturer’s recommended safety procedures.	
11.46	Fill the anti-lock brake system (ABS) master cylinder with recommended fluid following manufacturer’s procedures; inspect system for leaks.	
11.47	Bleed the anti-lock brake system’s (ABS) front and rear hydraulic circuits following manufacturer’s procedures.	
11.48	Remove and install anti-lock brake system (ABS) electrical/electronic/hydraulic components following manufacturer’s procedures and specifications.	
11.49	Service, test, and adjust anti-lock brake system (ABS) speed sensors following manufacturer’s recommended procedures.	
11.50	Diagnose anti-lock brake system (ABS) braking problems caused by vehicle modifications (tire size, curb height, final drive ratio, etc.).	
11.51	Identify and inspect electronic brake control systems; determine necessary action.	
11.52	Identify traction control and vehicle stability control systems components.	
11.53	Describe the operation of a regenerative braking system.	
12.0	Demonstrate proficiency in diagnosing/troubleshooting electrical/electronic related components.--The student will be able to:	
12.01	Use wiring diagrams during diagnosis of electrical circuit problems.	
12.02	Check electrical circuits with a test light; determine necessary action.	
12.03	Check voltage and voltage drop in electrical/electronic circuits using a digital multi-meter (DMM); determine needed repairs.	
12.04	Check current flow in electrical/electronic circuits and components using an ammeter; determine necessary action.	
12.05	Check electrical circuits using jumper wires; determine necessary action.	
12.06	Find shorts, grounds, opens, and resistance problems in electrical/electronic circuits; determine necessary action.	
12.07	Measure and diagnose the cause(s) of abnormal key-off battery drain, parasitic draw; determine necessary action.	
12.08	Inspect and test fusible links, circuit breakers, and fuses; replace as needed.	
12.09	Inspect and test switches, connectors, relays, and wires of electrical/electronic circuits; repair or replace as needed.	
Battery Diagnosis and Service	
12.10	Perform battery state-of-charge test; determine needed service.	
12.11	Perform battery capacity and conductance (load, high-rate discharge) test; determine needed service.	
12.12	Maintain or restore electronic memory functions.	
12.13	Inspect, clean, and replace battery.	
12.14	Perform slow/fast battery charge.	
12.15	Inspect and clean battery cables, connectors, clamps, and hold-downs; repair or replace as needed.	
12.16	Start a vehicle using jumper cables using a battery auxiliary power supply.	
12.17	Identify high-voltage circuits of electric or hybrid electric vehicle and related safety precautions.	
12.18	Identify electronic modules, security systems, radios, and other accessories that require re-initialization or code entry after reconnecting vehicle battery.	
Starting System Diagnosis and Repair	
12.19	Perform starter current draw and circuit voltage drop test; determine necessary action.	
12.20	Inspect and test starter relays and solenoids; replace as needed.	
12.21	Remove and replace/reinstall starter.	
12.22	Perform starter bench tests; determine necessary action.	
12.23	Inspect, test, and repair or replace switches, connectors, and wires of starter control circuits.	
12.24	Differentiate between electrical and engine mechanical problems that cause a slow-crank or a no-crank condition.	
Charging System Diagnosis and Repair	
12.25	Diagnose charging system problems that cause an undercharge, a no-charge or an overcharge condition.	
12.26	Inspect and adjust alternator drive belts; replace as needed.	
12.27	Remove, inspect, and replace/reinstall alternator.	
12.28	Perform charging circuit voltage drop tests; determine needed repairs.	
Lighting Systems Diagnosis and Repair	
12.29	Diagnose brighter than normal, intermittent, dim or no light operation.	
12.30	Inspect, replace, and aim headlights and bulbs.	
12.31	Inspect and diagnose incorrect turn signal or hazard light operation; repair or replace as needed.	
12.32	Identify system voltage and safety precautions associated with high-intensity discharge headlights.	
Gauges, Warning Devices, and Driver Information Systems Diagnosis and Repair	
12.33	Diagnose intermediate, high, low or no gauge readings.	
12.34	Inspect and test gauges and gauge sending units; replace as needed.	
12.35	Inspect and test connectors, wires, and printed circuit boards of gauge circuits; repair or replace as needed.	
12.36	Diagnose incorrect operation of warning devices and other driver information systems.	
12.37	Diagnose intermediate, high, low or no readings on electronic instrument clusters.	
12.38	Inspect and test sensors, sending units, connectors, and wires of electronic instrument circuits; repair or replace as needed.	
Horn and Wiper/Washer Diagnosis and Repair	
12.39	Diagnose incorrect horn operation; repair as needed.	
12.40	Diagnose incorrect wiper operation; diagnose wiper speed control and park problems; repair as needed.	
12.41	Diagnose incorrect windshield washer operation; repair as needed.	
Accessories Diagnosis and Repair	
12.42	Diagnose incorrect operation of motor-driven accessory circuits; repair as needed.	
12.43	Diagnose incorrect heated glass operation; repair as needed.	
12.44	Diagnose incorrect electric door and hatch/trunk lock operation; repair as needed.	
12.45	Diagnose incorrect operation of cruise control systems; repair as needed.	
12.46	Diagnose supplemental restraint system (SRS) problems; repair as needed.  (NOTE:  Follow manufacturer’s safety procedures to prevent accidental deployment.)	
12.47	Diagnose radio static and weak, intermittent, or no radio reception.	
12.48	Disable and enable an airbag system for vehicle service; verify indicator lamp operation.	
12.49	Remove and reinstall door panel.	
12.50	Describe the process for software transfers, software updates, or flash reprogramming on electrical modules.	
13.0	Demonstrate proficiency in heating, air conditioning and engine cooling systems.--The student will be able to:	
13.01	Diagnose unusual operating noises in the A/C system; determine necessary action.	
13.02	Conduct a performance test of the A/C system; determine needed repairs.	
13.03	Leak test a/c system; determine necessary action.	
13.04	Inspect the condition of discharged oil.	
13.05	Select oil type; measure and add oil to the A/C system as needed.	
13.06	Identify refrigerant type; select and connect proper gauge set; record temperature and pressure readings.	
Refrigeration System Component Diagnosis and Repair Compressor and Clutch	
13.07	Diagnose A/C system problems that cause the protection devices (pressure, thermal, and PCM) to interrupt system operation; determine necessary action.	
13.08	Inspect A/C compressor drive belts; replace as needed.	
13.09	Inspect, test, and replace A/C compressor clutch components or assembly.	
13.10	Remove and replace A/C compressor and mountings.	
13.11	Identify hybrid vehicle A/C system electrical circuits and service/safety precautions.	
Evaporator, Receiver/Drier, Condenser, Etc.	
13.12	Diagnose A/C system problems caused by too much moisture in the refrigerant; determine necessary action.	
13.13	Install A/C system filter.	
13.14	Remove and inspect A/C system mufflers, hoses, lines, fittings, o-rings, seals, and service valves; replace as needed.	
13.15	Inspect A/C condenser for air flow restrictions; service as required.	
13.16	Inspect receiver/drier or accumulator/drier; replace as needed.	
13.17	Inspect and test expansion valve or orifice (expansion) tube; replace as needed.	
13.18	Inspect evaporator housing water drain; repair as needed.	
Heating and Engine Cooling Systems Diagnosis and Repair	
13.19	Diagnose temperature control problems in the heater/ventilation system; determine necessary action.	
13.20	Perform cooling system, cap, and recovery system tests (pressure, combustion leakage, and temperature); determine necessary action.	
13.21	Inspect engine cooling and heater system hoses and belts; replace as needed.	
13.22	Inspect, test, and replace thermostat and housing.	
13.23	Determine coolant condition; drain and recover.	
13.24	Flush system and refill with recommended coolant; bleed system.	
13.25	Clean, inspect, and test fan, fan clutch (electrical and mechanical), fan shroud, and air dams; replace as needed.	
13.26	Inspect and test heater control valve(s); replace as needed.	
Operating Systems and Related Controls Diagnosis and Repairs	
13.27	Diagnose failures in the electrical controls of heating and A/C systems; determine necessary action.	
13.28	Inspect and test A/C-heater blower, motors, resistors, switches, relays, wiring, and protection devices; repair as needed.	
13.29	Test A/C compressor load cut-off systems; determine needed repairs.	
13.30	Using a scan tool, observe and record related HVAC data and trouble codes.	
Vacuum/Mechanical	
13.31	Diagnose failure in the vacuum and mechanical controls of the heating and A/C system; determine necessary action.	
13.32	Inspect and test A/C-heater control panel assembly; replace as needed.	
13.33	Inspect and test A/C-heater control cables and linkages adjust or replace as needed.	
13.34	Inspect and test A/C-heater vacuum control switches, hoses, diaphragms (motor), vacuum reservoir, check valve, and restrictors; replace as needed.	
13.35	Inspect and test A/C-heater ducts, doors, hoses, and outlets; replace as needed.	
Automatic and Semi-Automatic Temperature Controls	
13.36	Check operation of automatic and semi-automatic heating, ventilation, and air-conditioning (HVAC) control systems; determine necessary action.	
Refrigerant Recovery, Recycling, and Handling	
13.37	Verify correct operation and maintenance of refrigerant handling equipment.	
13.38	Identify and recover A/C system refrigerant.	
13.39	Recycle refrigerant.	
13.40	Label and store refrigerant.	
13.41	Evaluate and charge A/C system.	
14.0	Demonstrate proficiency in engine performance services.--The student will be able to:	
14.01	Interpret and verify complaint; determine necessary action.	
14.02	Inspect engine assembly for fuel, oil, coolant, and other leaks; determine necessary action.	
14.03	Diagnose unusual engine noise or vibration problems; determine necessary action.	
14.04	Diagnose unusual exhaust color, odor, and sound; determine needed action.	
14.05	Perform engine absolute (vacuum/boost) manifold pressure tests; determine necessary action.	
14.06	Perform cylinder power balance test; determine needed action.	
14.07	Perform cylinder compression test; determine needed action.	
14.08	Perform cylinder leakage test; determine needed action.	
14.09	Diagnose engine mechanical, electrical, electronic, fuel and ignition problems with an oscilloscope and engine diagnostic equipment; determine needed action.	
Computerized Engine Controls Diagnosis and Repair	
14.10	Diagnose emissions or drive-ability problems resulting from of computerized engine controls with no diagnostic trouble codes stored; determine necessary action.	
14.11	Retrieve and record stored diagnostic trouble codes.	
14.12	Diagnose the causes of emissions or drive-ability problems resulting from failure of computerized engine controls with stored diagnostic trouble codes.	
14.13	Inspect, test, adjust, and replace computerized engine control system sensors, powertrain control module (PCM), actuators, and circuits.	
14.14	Obtain and interpret digital multi-meter (DMM) readings.	
14.15	Access and use electronic service information (ESI).	
14.16	Locate and interpret vehicle and major component identification number (VIN, vehicle certification labels and calibration decals).	
14.17	Inspect and test power and ground circuits and connections; service or replace as needed.	
14.18	Practice recommended precautions when handling static sensitive devices.	
14.19	Diagnose drive-ability and emissions problems resulting from failures of interrelated systems (cruise control, security alarms, torque controls, suspension controls, traction controls, torque management, A/C, automatic transmissions, and similar systems); determine necessary action.	
14.20	Update diagnostic scanner.	
14.21	Perform product specific OBD II drive cycle diagnostic tests.	
Ignition System Diagnosis and Repair	
14.22	Diagnose no-starting, drive-ability, and emissions problems on vehicles with electronic ignition (distributor-less) systems; determine necessary action.	
14.23	Diagnose no-starting, drive-ability, and emissions problems on vehicles with distributor ignition (DI) systems; determine needed repairs.	
14.24	Inspect and test ignition primary circuit wiring and components; repair or replace as needed.	
14.25	Inspect and test ignition system secondary circuit wiring and components; replace as needed.	
14.26	Inspect and test ignition coil(s); replace as needed.	
14.27	Inspect and test ignition wiring harness and connectors; replace as needed.	
14.28	Inspect and test ignition system pick-up sensors or triggering devices including crankshaft and camshaft sensors; replace as needed.	
14.29	Inspect, test, and/or replace ignition control module and powertrain/engine control module; reprogram as needed.	
14.30	Service product specific ignition systems.	
14.31	Remove and replace spark plugs; inspect secondary ignition components for wear and damage.	
Fuel, Air Induction, and Exhaust Systems Diagnosis and Repair	
14.32	Diagnose hot or cold no-starting, hard starting, poor drive-ability, incorrect idle speed, poor idle, flooding, hesitation, surging, engine misfire, power loss, stalling, poor mileage, dieseling, and emissions problems on vehicles with injection-type fuel system; determine needed action.	
14.33	Inspect fuel tank and fuel cap; inspect and replace fuel lines, fittings, and hoses.	
14.34	Check fuel for contaminants and quality.	
14.35	Inspect and test fuel pumps and pump control systems; replace as needed.	
14.36	Replace fuel filters.	
14.37	Inspect and test fuel pressure regulation system and components.	
14.38	Remove, clean, and reinstall throttle body; adjust related linkages	
14.39	Inspect and test fuel injectors; clean and replace.	
14.40	Inspect throttle body mounting plates, air induction and filtration system, intake manifold, and gaskets; clean or replace as needed.	
14.41	Remove, inspect, and test vacuum and electrical components and connections of fuel system; repair or replace as needed.	
14.42	Inspect exhaust manifold, exhaust pipes, mufflers, resonators, tail pipes, and heat shields; repair or replace as needed.	
14.43	Perform exhaust system back-pressure test; determine needed action.	
14.44	Test the operation of turbocharger/supercharger systems; determine needed action.	
14.45	Remove, clean, inspect, and repair or replace turbocharger/supercharger system components.	
14.46	Identify the causes of turbocharger/supercharger failure; determine needed action.	
14.47	Inspect and test catalytic converter efficiency.	
14.48	Interpret diagnostic trouble codes (DTCs) and scan tool data related to the emissions control systems; determine necessary action.	
14.49	Check and refill diesel exhaust fluid (DEF).	
Emissions Control Systems Diagnosis and Repair Positive Crankcase Ventilation	
14.50	Diagnose oil leaks, emissions, and drive-ability problems resulting from failure of the positive crankcase ventilation (PCV) system.	
14.51	Inspect and test positive crankcase ventilation (PCV) filter/breather cap, valve, tubes, orifices, and hoses; service or replace as needed.	
Exhaust Gas Recirculation	
14.52	Diagnose emissions and drive-ability problems caused by failure of the exhaust gas recirculation (EGR) system.	
14.53	Inspect and test valve, valve manifold, and exhaust passages of exhaust gas recirculation (EGR) systems; service or replace as needed.	
14.54	Inspect and test vacuum/pressure controls, filters, and hoses of exhaust gas recirculation (EGR) systems; service or replace as needed.	
14.55	Inspect and test electrical/electronic sensors, controls, and wiring of exhaust gas recirculation (EGR) systems; repair or replace as needed.	
Exhaust Gas Treatment	
14.56	Diagnose emissions and drive-ability problems resulting from failure of the secondary air injection and catalytic converter systems.	
14.57	Inspect and test mechanical components of secondary air injection systems; service or replace as needed.	
14.58	Inspect and test electrical/electronically-operated components and circuits of air injection systems; replace as needed.	
14.59	Inspect and test components of catalytic converter systems; replace as needed.	
Evaporative Emissions Controls	
14.60	Diagnose emissions and drive-ability problems resulting from failure of evaporative emissions control system.	
14.61	Inspect and test components and hoses of evaporative emissions control system; replace as needed.	
Engine Related Service	
14.62	Adjust valves on engines with mechanical or hydraulic lifters.	
14.63	Verify correct camshaft timing; determine needed action.	
14.64	Verify engine operating temperature; determine needed action.	
14.65	Perform cooling system pressure tests; check coolant condition; inspect and test radiator, pressure cap, coolant recovery tank, and hoses; service or replace as needed.	
14.66	Inspect and test thermostat, by-pass, and housing; replace as needed.	
14.67	Inspect and test mechanical/electrical fans, fan clutch, fan shroud/ducting, air dams, and fan control devices; service or replace as needed.	

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.

Special Notes

The purpose of this program is to prepare students for employment and/or specialized training in the automotive industry.  The program provides specialized corporate/association job preparatory training.

Automotive Technology Programs sponsored by automobile manufacturers require an internship at a dealership. 

The program must be NATEF Master Certified and have a business plan approved by the appropriate industry affiliated organization.  Instructors must be ASE Certified in all areas that they teach in addition to being certified in Engine Performance and Electrical/Electronic Systems.  ASE Master Technician and Advanced Engine Performance (L1) ASE Certification is preferred.  Instructors must meet the specific product certification as specified in the business plan.

Program must meet the equipment and specialty tool requirement as specified in the business plan.  Must offer Federally recognized refrigerant-recycling certification training.

Career and Technical Student Organization (CTSO)

SkillsUSA is the intercurricular career and technical student organization for providing leadership training and reinforcing specific career and technical skills.  Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities to meet individual needs and ensure equal access. Postsecondary students with disabilities must self-identify, present documentation, request accommodations if needed, and develop a plan with their counselor and/or instructors. Accommodations received in postsecondary education may differ from those received in secondary education. Accommodations change the way the student is instructed. Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems. Documentation of the accommodations requested and provided should be maintained in a confidential file.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:

http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml